ElectriGate · Scotland

Electric Gates
Fife

Electric gates supplied, fabricated and installed across Fife — from Dunfermline and the Forth crossings through Kirkcaldy and the coast to Glenrothes and central Fife.

Covering west and central Fife
Residential & commercial
Gates & railings made in-house
Recent installations

A look at our work in Scotland

Every gate is made to measure for the property it goes on. Here is a small selection of recent installations by your local fabricator.

Composite wood-effect electric swing gates in a black frame between brick pillars on a gravel driveway
Composite, built to last

Holds its colour through Scottish winters with none of the annual treating timber needs.

Anthracite slatted composite electric gates with keypad entry mounted on a stone pillar
Entry on your terms

Keypad, fob, intercom or phone app — specified around how the entrance actually gets used.

Anthracite composite sliding electric gate with visible sliding motor on a block paved driveway
No swing clearance needed

Slides parallel to the boundary, so a short driveway is no obstacle.

See More of Our Work →
Meet your installer

Dale Ward — fabricator and installer

Dale Ward, ElectriGate electric gate fabricator and installer covering Fife
Dale W.
Verified
Musselburgh, East Lothian

Dale began his fabrication apprenticeship in 2012 with a family-run Scottish gate and railing company, working across commercial and domestic projects. He has worked independently since, and still makes gates and railings together rather than treating them as separate trades.

Composite and traditional wrought iron gates are fabricated in his own workshop, paired with automation from the leading brands. Aluminium and timber gates are sourced from specialist suppliers for him to automate, which means the material is chosen to suit the property rather than limited to what one workshop happens to make.

Fife is straightforward to reach from Musselburgh across the Forth crossings, and the work here spans the full range — the historic centre of Dunfermline, the coastal streets of Kirkcaldy, and the planned housing of Glenrothes, each needing a different conversation.

Composite gates Wrought iron Matching railings Access automation Commercial gates
Get a Free Quote →
What matters where you are

Fife is not one place

A gate on the Kirkcaldy Esplanade has different demands to one on a Glenrothes estate or a listed frontage in Dunfermline.

On the coast — salt and wind

Kirkcaldy runs four miles along the Forth and much of its housing sits within a mile of the water. Salt corrodes untreated steel; wind turns a solid gate into a sail. Galvanising, stainless fixings and sometimes a slatted infill that lets air through are the answers.

In Dunfermline — consent

The historic core around the Abbey carries conservation area coverage and a high concentration of listed buildings, where consent is needed regardless of gate height. The Victorian villas out along Garvock Hill raise a different question: whether the existing piers will carry automation.

In Glenrothes — what the developer left

A new town, so almost every entrance was laid out by a developer. Square openings and firm ground, but two invisible variables: whether ducting was laid to the boundary, and whether the title carries burdens on boundary treatments.

What we install

Electric gate types & services

Electric Swing Gates

The most popular residential choice. Composite or traditional wrought iron, fabricated to suit the property.

Learn more →

Electric Sliding Gates

Travels parallel to the boundary, so no swing clearance is needed. Suits shallow driveways and wide openings.

Learn more →

Cantilever Gates

Slides with no ground track at all — nothing to fill with snow, grit or leaves. Worth considering in Scotland.

Learn more →

Driveway Automation

Full systems including video intercom, keypads, remote fobs, vehicle detection loops and app control.

Learn more →

Automate Existing Gates

Already have gates? Motors can often be added without replacing them, from around £2,000.

Find out more →

Railings & Gate Repairs

Matching railings fabricated alongside your gate, plus repairs to motors, panels and access control.

Learn more →
Pricing guide

How much do electric gates cost in Fife?

There are enough variables in an electric gate that a single price would be misleading, so these are starting figures rather than ranges. Each reflects a full-size double driveway gate — 2 metres or more per leaf, at intermediate specification — rather than the smallest thing that could be built.

Prices and minimum specifications vary by region and installer. A precise quote follows a site survey, which is free and carries no obligation.

Full cost guide →
Electric swing gates from £6,000
Electric sliding gates from £7,000
Cantilever gates quoted at survey
Automation & access control from £8,000
Automating existing gates from £2,000

Starting figures for a 2m+ double driveway gate at intermediate specification. Groundwork varies by site.

Common questions

Frequently asked questions

Which parts of Fife do you cover?

West and central Fife — Dunfermline, Kirkcaldy and Glenrothes each have their own page, and the surrounding towns and villages of each are covered too, including Rosyth, Inverkeithing, Burntisland, Leven and Markinch. Send us your postcode if yours is not shown.

Will a sliding gate work through a Fife winter?

A tracked one can struggle, since the ground channel fills with grit and snow and freezes. A cantilever gate has no ground track at all, which removes the problem entirely. It needs more clear space alongside the opening and costs more, but on an exposed entrance it is often worth it.

Will a gate near the Forth corrode more quickly?

It will if it is not specified for the setting. Hot-dip galvanising before powder coating, stainless fixings and sealed control enclosures make the difference, and composite infill does not corrode at all.

Do I need planning permission in Scotland?

Scotland operates under its own planning legislation. Broadly a gate adjoining a road may be no more than one metre without permission and two metres elsewhere, with listed buildings and conservation areas needing consent regardless. Our planning permission guide has a dedicated Scottish section.

Can you automate the gates I already have?

Often, yes. The gates need to be structurally sound, the piers must carry the extra load, and the weight and leaf width need to fall within an operator's range. Where all three hold it starts from around £2,000 rather than £6,000 upward for a new installation.

Towns we cover

Electric gate installers across Fife

Don’t see your town? Send us an enquiry — the surrounding villages of each are covered too, or see all areas we cover.