Electric Gates
Airdrie
Looking for electric gate installation in Airdrie? We work with a trusted Scottish fabricator covering the town and North Lanarkshire — supplying and fitting swing gates, sliding gates, cantilever gates and full driveway automation.
A look at our work in Scotland
Every gate is made to measure for the property it goes on. Here is a small selection of recent installations by your local fabricator.
Holds its colour through Scottish winters with none of the annual treating timber needs.
Keypad, fob, intercom or phone app — specified around how the entrance actually gets used.
Slides parallel to the boundary, so a short driveway is no obstacle.
Nothing here is a standard size
Airdrie and Coatbridge grew up around ironworks and coal, and the housing reflects that history rather than any plan. Victorian and Edwardian villas on the better streets, terraced rows, interwar semis, postwar estates and modern infill, frequently all within a few hundred yards of each other.
What that means in practice is that very few entrances here are a standard size. Openings widened informally over decades, boundary walls rebuilt at some point in a slightly different position, piers that are not quite square to one another, ground that falls away across the entrance. A gate bought as a stock size and adjusted to fit will always look adjusted.
All of our fabricator's metalwork is made to measure rather than bought in, which is the whole answer to this. The opening gets measured properly, the gate gets drawn to suit it, and the result fits as though the entrance was built for it. On an older property that is the difference between a gate that looks right and one that looks bought.
Coverage area: Airdrie and surrounding North Lanarkshire
Made to the opening, not to a catalogue size
Electric Swing Gates
Drawn to the actual opening, so piers that are not quite square or ground that falls across the entrance are designed for rather than worked around.
Learn more →Electric Sliding Gates
Useful where an Airdrie driveway has been widened over the years and a pair of swing leaves would be awkwardly unequal.
Learn more →Cantilever Gates
An option where the ground falls across the entrance, since a cantilever gate never touches the driveway as it moves.
Learn more →Driveway Automation
Keypads, fobs, video intercom and app control, wired to suit how the house is actually used, from a villa to a postwar semi.
Learn more →Automate Existing Gates
Plenty of older Airdrie gates are sound enough to take motors. The posts and the hinge side are checked before anything is ordered.
Find out more →Railings & Gate Repairs
Railings fabricated to run with the new gate, and repairs to existing motors, safety edges and keypads.
Learn more →How much do electric gates cost in Airdrie?
Older Airdrie entrances rarely come in standard sizes, so the figures below are where a full-size, made-to-measure double gate starts. What moves the price here is usually the opening itself: piers that need rebuilding or replacing with steel posts, ground that needs levelling, and the length of the cable run from the house.
Prices and minimum specifications vary by region and installer. A precise quote follows a site survey, which is free and carries no obligation.
Full cost guide →Starting figures for a 2m+ double driveway gate at intermediate specification. Groundwork varies by site.
Frequently asked questions about electric gates in Airdrie
My entrance is not square. Is that a problem?
No, but it needs measuring properly. Older properties frequently have openings that are out of square, on a slope, or wider at one side than the other. Because all metalwork is fabricated to measure rather than bought as stock sizes, the gate is made to suit the opening rather than the opening being altered to suit a gate.
Will my old boundary walls take a gate?
That is what a survey establishes. Walls of that age vary enormously in condition, and an electric gate applies considerably more load than a manual one through its operating cycle. Where the existing structure will not carry it, the options are new piers, independent steel posts set behind the wall, or a sliding gate which loads the ground differently.
Do you install electric gates throughout Airdrie?
Yes — our fabricator covers Airdrie along with Coatbridge, Caldercruix, Plains, Chapelhall, Calderbank and across to Cumbernauld.
Can you match the style of my property?
Yes. Bespoke fabrication means the design is drawn to suit rather than picked from a range. On a Victorian villa that usually means traditional metalwork in an open design; on a modern property, horizontal slats or composite infill. Send photographs with your enquiry and it can be discussed properly.
Do I need planning permission in Scotland?
Scotland has its own planning legislation. Broadly a gate adjoining a road may be no more than one metre without permission and two metres elsewhere, with listed buildings and conservation areas needing consent regardless. Our planning permission guide has a dedicated Scottish section.
Worth reading first
Scottish planning rules
Scotland has its own planning legislation. Our guide has a dedicated Scottish section.
Planning guide →Cantilever gates
No ground track to fill with snow or grit. Worth considering in a Scottish winter.
Cantilever gates →What safe looks like
BS EN 12453 applies UK-wide — force limitation, safety edges and photocells.
Safety guide →What it will cost
How gate type, size, material and groundwork move the final figure.
Cost guide →Send us your postcode and the width of your entrance using the form below and Dale will come back to you directly.
Electric gate installers across Scotland
We cover the central belt, Fife and the Borders, with 33 towns each having their own page and the surrounding villages of each covered too.
Lothians
West of Scotland
See full West of Scotland coverage →
Fife
Forth Valley
See full Forth Valley coverage →
Scottish Borders
See full Scottish Borders coverage →
Don’t see your town? Send us an enquiry — or see all areas we cover.
