Electric Gates
Wishaw
Looking for electric gate installation in Wishaw? We work with a trusted Scottish fabricator covering the town and North Lanarkshire — supplying and fitting swing gates, sliding gates, cantilever gates and full driveway automation.
A look at our work in Scotland
Every gate is made to measure for the property it goes on. Here is a small selection of recent installations by your local fabricator.
Holds its colour through Scottish winters with none of the annual treating timber needs.
Keypad, fob, intercom or phone app — specified around how the entrance actually gets used.
Slides parallel to the boundary, so a short driveway is no obstacle.
Ram, arm or underground: choosing the motor
Most of the decisions on a swing gate are visible ones: the design, the height, the colour. The one that affects how the entrance looks and works for years to come is less obvious, and that is the type of motor that drives it.
There are three main options. Ram motors fix between the pier and the gate leaf and push it open in a straight line. They are robust, suit most domestic gates and are the simplest to service. Articulated-arm motors work like an elbow and come into their own where the piers are deep, or where the hinge sits well back from the face of the pier, which would leave a ram no room to work.
Underground motors sit in a sealed box below the hinge, with nothing showing above ground. On a period frontage or a design where the hardware would spoil the look, they are the tidiest answer. They cost more, because the foundation box has to be dug in and drained properly. On low ground that collects water, drainage is the part that needs most care.
Which one suits a Wishaw entrance depends on the pier depth, the gate weight and the leaf width, and on how much of the mechanism you are happy to see. It is settled at survey with the gate in front of you, not from a brochure.
Coverage area: Wishaw and North Lanarkshire
Choosing the right motor for the gate
Electric Swing Gates
Hung on ram, articulated-arm or underground motors, chosen to suit the depth of the piers and how visible you want the hardware.
Learn more →Electric Sliding Gates
For wider North Lanarkshire openings, with the motor sitting at the side of the drive rather than on the gate.
Learn more →Cantilever Gates
No track to keep clear, which suits the more exposed entrances out towards Shotts and Carluke.
Learn more →Driveway Automation
Keypad, fob, intercom and app control, wired back to the same control box as the motors.
Learn more →Automate Existing Gates
Sound existing gates can often take motors. Arm or ram motors are usually the simplest retrofit.
Find out more →Railings & Gate Repairs
Replacement of failed or noisy motors, worn hinges and safety devices, plus matching railings.
Learn more →How much do electric gates cost in Wishaw?
Motor type makes a real difference to a Wishaw quote. Underground motors keep the entrance clean-looking but need foundation boxes dug in, so they start above arm or ram motors fixed to the piers. The figures below are starting points for a full-size double gate.
Prices and minimum specifications vary by region and installer. A precise quote follows a site survey, which is free and carries no obligation.
Full cost guide →Starting figures for a 2m+ double driveway gate at intermediate specification. Groundwork varies by site.
Frequently asked questions about electric gates in Wishaw
Which type of gate motor is best?
None is best everywhere. Ram motors suit most domestic swing gates, articulated arms suit deep piers, and underground motors suit entrances where nothing should show. The survey looks at pier depth, hinge position, gate weight and leaf width before recommending one.
Do underground motors flood?
They can if the foundation box is not drained. A proper installation includes a drain from the box to a soakaway or to the surface water system, and the motors themselves are sealed. On ground that holds water this matters more, so it is checked at survey.
Can motors be added to my existing gates?
Often, yes, if the gates are sound and the posts are firm. Arm and ram motors are the usual retrofit because they fix to the existing piers. Automating sound existing gates starts from around £2,000, against £6,000 upward for a new installation.
Which areas around Wishaw do you cover?
Wishaw itself, with Motherwell, Newmains, Overtown, Waterloo and Cleland, and out to Carluke and Shotts.
How noisy is an electric gate?
Modern ram and arm motors are quiet, closer to a hum than a grind. Underground motors are quieter still. A gate that has become loud is usually telling you something: a worn hinge, a dry bearing or a motor working harder than it should. That is worth a service visit.
Worth reading first
Scottish planning rules
Scotland has its own planning legislation. Our guide has a dedicated Scottish section.
Planning guide →Cantilever gates
No ground track to fill with snow or grit. Worth considering in a Scottish winter.
Cantilever gates →What safe looks like
BS EN 12453 applies UK-wide — force limitation, safety edges and photocells.
Safety guide →What it will cost
How gate type, size, material and groundwork move the final figure.
Cost guide →Send us your postcode and the width of your entrance using the form below and Dale will come back to you directly.
Electric gate installers across Scotland
We cover the central belt, Fife and the Borders, with 33 towns each having their own page and the surrounding villages of each covered too.
Lothians
West of Scotland
See full West of Scotland coverage →
Fife
Forth Valley
See full Forth Valley coverage →
Scottish Borders
See full Scottish Borders coverage →
Don’t see your town? Send us an enquiry — or see all areas we cover.
