Electric Gates
Paisley
Looking for electric gate installation in Paisley? We work with a trusted Scottish fabricator covering the town and Renfrewshire — supplying and fitting swing gates, sliding gates, cantilever gates and full driveway automation.
A look at our work in Scotland
Every gate is made to measure for the property it goes on. Here is a small selection of recent installations by your local fabricator.
Holds its colour through Scottish winters with none of the annual treating timber needs.
Keypad, fob, intercom or phone app — specified around how the entrance actually gets used.
Slides parallel to the boundary, so a short driveway is no obstacle.
Wide entrances on Renfrewshire plots
Paisley’s larger houses, from the villas along Glasgow Road to the plots out towards Ralston and Elderslie, often have entrances wider than a standard double gate was ever designed for. Five or six metres is not unusual, and at that width the choice of gate type matters more than the style.
A pair of swing leaves at six metres means two three-metre leaves, each heavy and each needing three metres of clear depth to open. If the drive turns or rises close behind the gate, they simply will not fit. A sliding gate needs no depth, but it needs a clear run alongside the opening at least as long as the opening itself, and a level, solid strip of ground to run on.
Bi-folding gates sit between the two. Each side folds in half as it opens, so it needs roughly half the depth of a conventional swing gate. That makes them a good answer on a wide entrance where neither the depth nor the side space is quite there.
Where the entrance is flanked by original sandstone piers, those piers are part of the decision too. A wide, heavy gate puts more load on them than a narrow one, and independent steel posts set behind the stonework may be the right way to carry it.
Coverage area: Paisley and surrounding Renfrewshire
Gates for mill-era villas and the wider town
Electric Swing Gates
Designs proportioned for the villas along Glasgow Road and around Castlehead, hung from sound piers or independent steel posts.
Learn more →Electric Sliding Gates
Suits the wider entrances on the larger Renfrewshire plots towards Ralston and Elderslie.
Learn more →Cantilever Gates
No ground track, so original setts and gravel approaches on period properties stay intact.
Learn more →Driveway Automation
Video intercom and app control, mounted so the sandstone frontage is not spoiled.
Learn more →Automate Existing Gates
Existing gates on older Paisley properties can often take motors once the piers have been checked.
Find out more →Railings & Gate Repairs
Matching railings for Victorian frontages and repairs to existing gates, motors and access control.
Learn more →How much do electric gates cost in Paisley?
On Paisley’s sandstone frontages, whether the piers can carry the gate makes the largest difference to the price. Steel posts set behind them add cost but leave the stonework untouched. The figures below are starting points for a full-size double gate.
Prices and minimum specifications vary by region and installer. A precise quote follows a site survey, which is free and carries no obligation.
Full cost guide →Starting figures for a 2m+ double driveway gate at intermediate specification. Groundwork varies by site.
Frequently asked questions about electric gates in Paisley
My entrance is wider than most. What type of gate suits it?
It depends on the space behind and beside it. Swing gates need clear depth equal to one leaf width, sliding gates need a clear run alongside at least as long as the opening, and bi-folding gates need about half the depth of a swing gate. All three are fabricated to measure.
Will my sandstone piers carry a wide electric gate?
Sometimes, but wider and heavier gates put more load on them, so they are assessed at survey. Where the piers will not take it, steel posts set behind them carry the gate and leave the stonework untouched.
What is a bi-folding gate?
A gate where each leaf is hinged in the middle and folds back on itself as it opens. It needs much less driveway depth than a conventional swing gate, which makes it useful on wide entrances with limited space.
Which areas around Paisley do you cover?
Paisley, Johnstone, Renfrew, Erskine, Linwood, Barrhead and Elderslie, and across into Glasgow.
How long does a wide gate take to install?
Most installations take one to two days once fabrication is complete. A sliding gate on a wide opening, or new posts set behind existing piers, can add a day.
Worth reading first
Scottish planning rules
Scotland has its own planning legislation. Our guide has a dedicated Scottish section.
Planning guide →Cantilever gates
No ground track to fill with snow or grit. Worth considering in a Scottish winter.
Cantilever gates →What safe looks like
BS EN 12453 applies UK-wide — force limitation, safety edges and photocells.
Safety guide →What it will cost
How gate type, size, material and groundwork move the final figure.
Cost guide →Send us your postcode and the width of your entrance using the form below and Dale will come back to you directly.
Electric gate installers across Scotland
We cover the central belt, Fife and the Borders, with 33 towns each having their own page and the surrounding villages of each covered too.
Lothians
West of Scotland
See full West of Scotland coverage →
Fife
Forth Valley
See full Forth Valley coverage →
Scottish Borders
See full Scottish Borders coverage →
Don’t see your town? Send us an enquiry — or see all areas we cover.
