Electric Gates
Cromer
Looking for electric gate installation in Cromer? We work with a trusted fabricator covering the town and the north Norfolk coast — supplying and fitting swing gates, sliding gates, driveway automation and electric bollards.
A look at our work
Every gate we fit is made to measure for the property it goes on. Here is a small selection of recent installations — traditional and contemporary, swing and sliding.
Cliff-top, and it shows
Cromer sits on a cliff, and the Victorian and Edwardian villas along the Overstrand Road and out towards West Runton take the weather from the north with nothing in the way. It is a handsome setting and a demanding one for anything mechanical left outdoors.
Two things follow. Salt-laden air corrodes untreated steel, works into hinge pins and bearings, and finds any weakness in a control enclosure that has not been properly sealed. And wind on an exposed cliff-top frontage turns a solid gate into a sail, which affects post foundation depth, the sections used in the frame, and the motor rating. On a genuinely exposed entrance that can point toward a slatted or barred infill rather than a solid panel — a design conversation worth having before you settle on a look.
The villas themselves bring a third consideration. Most have original brick or flint piers built for a hand-operated gate, and after a century of this weather the mortar is frequently softer than it appears. Where they will not carry the repeated load of automation, independent steel posts set behind keep the load off the original fabric entirely.
Coverage area: Cromer and the north Norfolk coast
Electric gate types & services
Electric Swing Gates
The most popular residential choice. Two leaves hinged to piers, in composite, steel, aluminium or wrought iron.
Learn more →Electric Sliding Gates
Travels parallel to the boundary, so no swing clearance is needed. Suits shallow driveways and wide openings.
Learn more →Cantilever Gates
Slides with no ground track at all — nothing crossing the driveway to fill with grit or leaves.
Learn more →Driveway Automation
Full systems including video intercom, keypads, remote fobs, vehicle detection loops and app control.
Learn more →Automate Existing Gates
Already have gates? In many cases motors can be added without replacing them, subject to condition and weight.
Find out more →Electric Bollards
Automatic rising bollards for driveways and commercial entrances. Raised for security, lowered flush for a clear opening.
Learn more →Gate Repairs & Servicing
Motor faults, damaged panels, failed intercoms and annual servicing to keep the safety system compliant.
Learn more →How much do electric gates cost in Cromer?
Prices depend on gate size, material, type and automation spec. Groundwork matters too — ground conditions, cable runs and the state of any existing piers all move a job within these ranges.
Prices and minimum specifications vary by region and installer. Send a few photographs with your enquiry and your fabricator can give you a realistic figure before anyone arranges a visit.
Full cost guide →Frequently asked questions about electric gates in Cromer
Does wind affect what gate I can have?
On a cliff-top frontage, yes. A solid gate catches considerably more wind than the same gate inland, which affects post foundation depth, frame sections and motor rating. Sometimes a slatted or barred infill that lets air through is the sensible answer rather than a solid panel. It is assessed at survey.
Will a gate this close to the sea corrode?
It will if it is not specified for the setting. Salt-laden air attacks untreated steel and finds any weakness in a control box. Hot-dip galvanising before powder coating, stainless fixings and sealed enclosures make the difference. Composite and aluminium do not corrode at all and are worth considering here.
Will my Victorian piers take an electric gate?
Often, but it needs checking. Piers of that age were built for a hand-operated gate, and a century of coastal weather leaves the mortar softer than it looks. Where they will not carry the load, independent steel posts can be set behind so the original fabric takes none of the strain.
Do you install electric gates throughout Cromer?
Yes — our fabricator covers Cromer along with Sheringham, Overstrand, West and East Runton, Northrepps, Roughton and across to North Walsham.
How quickly can I get a price?
Send your postcode, the width of your opening and two or three photographs of the entrance and your fabricator can usually give you a realistic figure within a day or two, without waiting for a site visit.
Worth reading first
Which gate type suits you
How much space each type needs, materials compared, and how the automation works.
Buyer’s guide →Whether you need consent
The one metre rule, listed buildings and conservation areas, explained plainly.
Planning guide →What safe looks like
BS EN 12453, force limitation and safety edges — and how to spot a quote that omits them.
Safety guide →What it will cost
Real price ranges by gate type, and the factors that move a job within them.
Cost guide →Send your postcode, the width of your opening and a few photographs using the form below and your local fabricator will come back to you directly.
Electric gate installers across Norfolk
We cover the whole county, from King’s Lynn and the fens through Norwich and its villages out to the north coast. These towns each have their own page, and the surrounding villages of each are covered too.
Elsewhere in England
Covered by our fabricators
Scotland
33 towns across the central belt, Fife and the Borders
Don’t see your town? Send us an enquiry — the surrounding villages of each are covered too, or see all areas we cover.