Electric Gates
Poringland
Looking for electric gate installation in Poringland? We work with a trusted fabricator covering the village and south Norwich — supplying and fitting swing gates, sliding gates, matching pedestrian gates and driveway automation.
A look at our work
Every gate we fit is made to measure for the property it goes on. Here is a small selection of recent installations — traditional and contemporary, swing and sliding.
Don't forget the way in on foot
The detail most people overlook when planning an electric gate is how anyone gets in without a car. Postal deliveries, a neighbour with a spare key, family arriving on foot, you walking back from the shop. Cycling a four metre driveway gate every time somebody approaches on foot gets old quickly, and it puts unnecessary wear on the motor for no reason.
A separate pedestrian gate solves it properly. Fabricated at the same time and in the same style, it reads as one piece of work rather than an afterthought, and it can carry its own keypad, intercom release or simple thumb-turn depending on how you want it to behave. Where there is no room alongside for a separate gate, a wicket gate set within one of the main leaves is the alternative — less common, and it needs designing in from the start rather than added later.
Either way it is considerably cheaper done at the same time, since the metalwork is drawn and made in one go. Worth raising at enquiry rather than deciding six months later that you needed one.
Coverage area: Poringland and south Norwich
Electric gate types & services
Electric Swing Gates
The most popular residential choice. Two leaves hinged to piers, in composite, steel, aluminium or wrought iron.
Learn more →Electric Sliding Gates
Travels parallel to the boundary, so no swing clearance is needed. Suits shallow driveways and wide openings.
Learn more →Cantilever Gates
Slides with no ground track at all — nothing crossing the driveway to fill with grit or leaves.
Learn more →Driveway Automation
Full systems including video intercom, keypads, remote fobs, vehicle detection loops and app control.
Learn more →Automate Existing Gates
Already have gates? In many cases motors can be added without replacing them, subject to condition and weight.
Find out more →Electric Bollards
Automatic rising bollards for driveways and commercial entrances. Raised for security, lowered flush for a clear opening.
Learn more →Gate Repairs & Servicing
Motor faults, damaged panels, failed intercoms and annual servicing to keep the safety system compliant.
Learn more →How much do electric gates cost in Poringland?
Prices depend on gate size, material, type and automation spec. Groundwork matters too — ground conditions, cable runs and the state of any existing piers all move a job within these ranges.
Prices and minimum specifications vary by region and installer. Send a few photographs with your enquiry and your fabricator can give you a realistic figure before anyone arranges a visit.
Full cost guide →Frequently asked questions about electric gates in Poringland
Should I have a separate pedestrian gate?
Almost always worth it. Without one, the main gate cycles every time anyone walks up to the house, which is inconvenient and adds unnecessary wear to the motor. A pedestrian gate made at the same time and in the same style costs considerably less than adding one afterwards.
What if there is no room for a separate gate?
A wicket gate set within one of the main leaves is the usual answer — a smaller door within the gate itself. It needs designing in from the start, but it works where the entrance has no space alongside.
How does the postman get in?
However you choose to set it up. A keypad on the pedestrian gate, an intercom release from inside the house, a secure parcel box mounted outside the gate line, or a timed release during delivery hours. Worth deciding at survey rather than after installation.
Do you install electric gates throughout Poringland?
Yes — our fabricator covers Poringland along with Framingham Earl, Framingham Pigot, Brooke, Stoke Holy Cross, Bergh Apton and Loddon, and into south Norwich.
How quickly can I get a price?
Send your postcode, the width of your opening and two or three photographs of the entrance and your fabricator can usually give you a realistic figure within a day or two, without waiting for a site visit.
Worth reading first
Which gate type suits you
How much space each type needs, materials compared, and how the automation works.
Buyer’s guide →Whether you need consent
The one metre rule, listed buildings and conservation areas, explained plainly.
Planning guide →What safe looks like
BS EN 12453, force limitation and safety edges — and how to spot a quote that omits them.
Safety guide →What it will cost
Real price ranges by gate type, and the factors that move a job within them.
Cost guide →Send your postcode, the width of your opening and a few photographs using the form below and your local fabricator will come back to you directly.
Electric gate installers across Norfolk
We cover the whole county, from King’s Lynn and the fens through Norwich and its villages out to the north coast. These towns each have their own page, and the surrounding villages of each are covered too.
Elsewhere in England
Covered by our fabricators
Scotland
33 towns across the central belt, Fife and the Borders
Don’t see your town? Send us an enquiry — the surrounding villages of each are covered too, or see all areas we cover.